Manual
Manual
Everything you need to pair The Cockpit with your TV.
MODEL COCKPIT-BLK-001
In the box
- The Cockpit TV remote control
- Printed manual
No cable is supplied and no batteries are needed. You charge it with a USB-C cable you already have.
The buttons
Three buttons, top to bottom:
Charging
The Cockpit has a built-in rechargeable battery. Connect a USB-C cable to the port in the base and plug it into a power adapter, a computer, or the USB port on your TV.
Charging
Fully charged
- Charging time: 1 to 2 hours
- With daily use, a full charge lasts several weeks
No cable is supplied, and no batteries are needed.
Pairing with your TV
Note: only automatic code search is possible. Manual code entry is not enabled.
-
Turn on your TV.
-
Point the remote at the TV.
-
Press and hold POWER and VOL. UP together for about 5 seconds, until the LED flashes. 5 sec.
-
Release both buttons.
-
Press and hold POWER until the TV turns off. until the TV turns off
-
Release the button.
-
Press POWER to save the code.
Range and compatibility
The remote works over infrared with a range of up to 8 metres, which covers virtually every TV and every brand.
Standalone streaming sticks such as Apple TV, Chromecast and Fire TV use Bluetooth rather than infrared; for those you keep using the original remote.
Troubleshooting
- The TV does not respond
- Try again and aim the remote properly at the TV.
- Only the power button works
- Your TV probably does not support volume control over infrared.
- No LED while charging
- Check the USB-C cable and the power supply.
- The LED stays red
- Keep charging, or use a different adapter.
Contact
